Enkay Enterprises
  Home   |   Email   |   Contacts  
Steel & Metal Mechanics
    Universal Testing Machine : Analogue cum Computerized
Enkay Machines   Universal Testing Machine
(Analogue cum Computerized)
Universal Testing Machine is designed for testing metals and other materials under tension, compression, bending, transverse and shear loads. Hardness test on metals can also be conducted.
Enkay Universal Testing Machines comply with GRADE "A" of BS:1610 and GRADE 1.0 of IS:1828.
An accuracy of ±1% is maintained from 20% of the load range selected to full load.
  (Hydraulic) Mechanical UTM
  Hydraulic Electronic Microprocessor Based Universal Testing Machine
  Hydraulic Computerized UTM
  Computerized Servo Control UTM
  Computerized Universal Tesitng Machine
  Servo Universal Tesitng Machine
  Universal Tesitng Machine EKE.RDT 100
  Computer Controlled Electronic UTM
  Servo Hydraulic Universal Tesitng Machine
  Universal Tesitng Machine: Servo Series
  WinTest: Material Testing System
  Standard / Optional Accessories
  Torsion Testing Machine
  Rockwell Hardness Tester
  Brinell Hardness Tester
  Universal Pendulum Impact Tester
  Fatigue Testing Machine
  Tensile Testing Machines
  Erichsen Cupping Tester
  Computrised Brinell
Hardness Testing Machine
  Digital Impact
Testing Machine
  Rockwell Hardness
Testing Machine
  Ultrasonic Flaw Detector
  Tensile Testing Machine
with electronic display
  Universal Testing Machine
  (Analogue cum Digital)



400/440V, 50Hz Three Phase A.C Supply 1.5 H.P with hydraulic system
Designed to perform variety of tests like tension, compression, etc. on metallic materials.
Continuous roll autographic load recorder
Provision for computer with user friendly software
Auto detection and switching off provision in case of over load, over travel and specimen break.
Analogue and computerized control panel
Capacity: 200KN
Max. Range: 10-200KN ±0.1 KN
Min. Range: 0-20KN ±0.01KN
Maximum tensile clearance at full : (50-700 mm)
decedent piston position
Distance between columns: 500 mm.
Piston stroke: approx 200 mm.
Max Clearance for compression rest : 0-700(mm)
Max. Straining speed at No. Load : 150(mm / min)
  Standard Accessories:



Pair of compression plates dia 120 mm
For Tension Test Jaws:
Round specimen dia 10-20 mm
Round specimen dia 20-30 mm
Flat specimen thickness 0-10 mm
Flat specimen thickness 10-20 mm
Max. width for flat specimen 50 mm
For Transverse Test:
Adjustable Roller Support of width approx. 150 mm
Adjustable Roller Support of dia. approx. 30 mm
With max adjustable clearance approx. 500 mm
RS232 Serial Port/Data Cable

Optional Accessories:
Load rate Control
Load rate stabilizers
Flat Belt test
Bolt nut and Washer test
Single and double shear test
Tensile test for shouldered and threaded
Bend Re-bend test
  Universal Testing Machine : Analogue cum Computerized  
Home  |   About Us   |   Products   |   Services   |   News   |   Contact Us   |   E-mail   |   Sitemap   |   Disclaimer

All rights reserved with Enkay Enterprises